Ultra-pure Water Purifier

Features Adopts automatic control system and LCD display; Embedded with purification column, stable and reliable single RO1stsystem with higher ion rejection rate, and DI ion-exchange purification unit with larger capacity; Equipped with built-in 1.8L pressure water tank; System water output: 20, 40, 60 L/h.; It can simultaneously produce ultra-pure water (18.2MΩ.cm) and primary RO water Model LWP-S2-20 LWP-S2-20V LWP-S2-20F LWP-S2-20VF LWP-S2-40 LWP-S2-40V LWP-S2-40F LWP-S2-40VF LWP-S2-60 LWP-S2-60V LWP-S2-60F LWP-S2-60VF Type Standard Low TOC Eliminating endotoxin Synthesizing Production Rate [1] 20 series: 20 L/hour, 40 series: 40 L/hour, 60 series: 60 L/hour Dispensing Rate [2] Up to 2L/min Up to 2L/min Up to 2L/min Up to 2L/min Ultra-pure Water Quality [3] Resistivity (25℃) [4] 18.2MΩ.cm 18.2MΩ.cm 18.2MΩ.cm 18.2MΩ.cm Conductivity (25℃) 0.055μs/cm 0.055μs/cm 0.055μs/cm 0.055μs/cm TOC [5] 5ppb [6] 2ppb [7] 5ppb [6] 2ppb [7] Particles [8] <1/ml (>0.2μm) <1/ml (>0.2μm) <1/ml (>0.2μm) <1/ml (>0.2μm) Bacteria [8] <0.01 CFU/ml <0.01 CFU/ml <0.01 CFU/ml <0.01 CFU/ml Endotoxin [8] N/A N/A <0.001 EU/ml <0.001 EU/ml RNases [8] N/A N/A 1 pg/ml 1 pg/ml DNases [8] N/A N/A 5 pg/ml 5 pg/ml Protease [8] N/A N/A 0.15μg/ml 0.15μg/ml RO1st Water Quality [3] Ion Rejection Rate 98%-99% (with new RO module) 98%-99% (with new RO module) 98%-99% (with new RO module) 98%-99% (with new RO module) Organic Rejection Rate >99% (MW>300 Dalton) >99% (MW>300 Dalton) >99% (MW>300 Dalton) >99% (MW>300 Dalton) Particles and Bacteria Rejection Rate >99% >99% >99% >99% Feed Water Requirements Water Source Type Tap water Tap water Tap water Tap water Pressure 1-6 bar 1-6 bar 1-6 bar 1-6 bar Temperature 5-40 ℃ 5-40 ℃ 5-40 ℃ 5-40 ℃ Conductivity <2000μs/cm <2000μs/cm <2000μs/cm <2000μs/cm Total Hardness (In CaCO3) <300ppm <300ppm <300ppm <300ppm TOC <2000ppb <2000ppb <2000ppb <2000ppb Free Chlorine <3 ppm <3 ppm <3 ppm <3 ppm pH 4-10 4-10 4-10 4-10 Dissolved CO2 <30 ppm <30 ppm <30 ppm <30 ppm Electricity 100-240V, 50/60Hz 100-240V, 50/60Hz 100-240V, 50/60Hz 100-240V, 50/60Hz Total Power 20 series: 48W, 40 series: 72W, 60 series: 120W Dimension of Main Host (L*W*H) 273*555*568mm 273*555*568mm 273*555*568mm 273*555*568mm Weight About 21kg About 21kg About 21kg About 21kg Scope of application Various physical 、and chemical tests, biochemical analysis, blood tests, micro-analysis, washing, HPLC, IC, GC, analytical experiments. Atomic absorption/emission spectroscopy, mass spectrum, TOC detection, environmental monitoring, biochip development, trace organic matter analysis High-sensitivity ICP/MS, PCR, ppt-level analysis, isotope analysis, molecular biology, life sciences, disease control centers, drug testing institutes, quality inspection institutes, university research and other standard laboratories and various high-end precision instruments. Molecular biology, life sciences, genetic research, cell culture, amino acid analysis, protein purification, toxicology research, drug development, medical testing [1] Affected by inlet water quality, pressure, temperature and status of RO membrane; [2] Affected by the tank status and terminal filter; [3] The following values are typical and may vary depending on the nature and concentration of feed water contaminants; [4] According to USP requirements, the resistivity can be displayed as a non-temperature-compensated value; [5] Affected by the type of organics; [6] Inlet TOC<1000ppb, follow professional operating procedures and correct sampling conditions; [7] Inlet TOC<50ppb, follow professional operating procedures and correct sampling conditions; [8] Equipped with terminal micro-filter and follow professional operating procedures and correct sampling conditions；